ES series (Heavy Duty)* - Standard Features:
-Full height internal fiberglass stiffener(s)
-Beveled lock stiles - 1/8" in 2"
-Expanded polystyrene core

Go to Cut Sheet
Go to Tech Data Page

EP series (Extra Heavy Duty)* - Standard Features:
-Full height internal fiberglass stiffeners 6" on center
-Beveled lock stiles - 1/8" in 2"
-Expanded polystyrene core

Go to Cut Sheet
Go to Tech Data Page

*Optional cores also available in:
Honeycomb Core - Tech Data Standard, Premier
Polyurethane Core - Tech Data Standard, Premier
Balsa Core - Tech Data Standard, Premier

EF series (Fire-Rated) - Standard Features:
-45, 60 & 90 minute fire door installations 
-Category A or B positive pressure 
-Testing standards UL10C, NFPA252, and CAN/ULC S104 
-Maximum size = 4'0"x8'0" singles & 6'0"x7'2" pairs
-Mineral core
-Beveled lock stiles - 1/8" in 2"

-Available with EF 90 minute frame, KD (knockdown) or set-up and resin welded.

Go to Cut Sheet
Go to Tech Data Page
 

EH series (Hurricane-Rated) - Standard Features:
-+/- 70 PSF design pressure
-Missile level D
-Hurricane rated doors tested to the following ASTM standards:
    E1886-19/E1996-20 - Impact and cycle pressure resistance    
    E330/E330M-21 - Static pressure resistance
    E283/E283M-19 - Air infiltration
    E331-16 - Water penetration
   
-ADA Compliant with no surface bolts required in single door applications
-Extra deadlock not required!
-Maximum Size = 4'0" x 8'0" Singles, 8'0" x 8'0" pairs
-3lb Density Polystyrene Core
-Beveled lock stiles - 1/8" in 2"

Go to Cut Sheet
Go to Tech Data Page

Doors & Frames Come Pre-Drilled!

Why should your installers take time to drill pilot holes for templated mortise hardware? 
They shouldn't! 
Any hardware preps mortised into the door and/or frame come factory pre-drilled so your installers can hang doors quickly.  

Frames will also be factory drilled for anchoring fasteners.